Axor Agera Raiz Full Face Helmet with Spoiler

The Axor Agera Raiz takes the Agera's race-inspired full-face shape and finishes it in a two-tone black and grey colourway. Axor helmets are conceived and designed in Italy and promoted in India by Vega, and every Agera ships ISI, DOT and ECE 22.06 certified.

Underneath the finish, the Raiz runs the same platform as the rest of the Agera range: a wind-tunnel shaped shell with an integrated rear spoiler, dual brow vents, a tool-less visor system and a built-in sun visor.

It sits alongside the rest of the Axor Agera range at Store4Riders, part of the wider Axor helmet lineup.

Ventilation

• A top vent feeds air directly into the crown of the helmet
• Dual brow vents sit just above the visor line for airflow at eye level
• A rear exhaust vent is built into the spoiler itself, so air keeps moving even at the back of the shell
• A mouth vent and removable chin curtain round out the airflow path

Vision

• An optically correct, scratch-resistant outer visor keeps distortion out of your eyeline
• A quick, tool-less visor change mechanism lets you swap visors without tools
• An internal smoke sun visor is built in for instant glare protection, so you are not reaching for sunglasses at every stop
• The visor is Pinlock-ready, so a Pinlock insert (sold separately) can be added for fog-free vision in cold or wet weather

Safety and Standards

• An ABS high-impact outer shell handles the structural side of protection
• Weighs weight to be confirmed with Axor
• An Emergency Quick Release System (EQRS) lets first responders remove the helmet safely after a fall, by pulling the cheek pads free without twisting the neck
• A micrometric quick-release buckle gives a secure, adjustable fit that does not loosen the way a D-ring can over a long ride
• Certified to ECE 22.06 (Europe) and DOT FMVSS No. 218 (US), and ISI certified to IS:4151 for the Indian market
• Testing under these standards covers energy attenuation, penetration resistance and retention strength, the three things a helmet actually has to do in a crash

Aerodynamics and Styling

• A wind-tunnel shaped shell with an integrated rear spoiler is built to cut drag and reduce neck fatigue on longer, faster rides
• The spoiler doubles as the rear exhaust vent, so it is functional as well as visual
• The two-tone black and grey finish sits under the same "AGERA" and "AXOR" branding and silver "X" crown logo used across the range

Getting the Fit Right

A helmet only protects you if it actually fits. Measure your head circumference with a soft tape before you order, and check it against the size chart on this page. The guide to choosing a properly fitting helmet walks through how a helmet should sit, and the helmet maintenance guide covers how to keep the liner and visor in good shape once it arrives.

FAQs

Q1: What colourway is the Axor Agera Raiz?

A1: It is finished in a two-tone black and grey colourway, distinct from the solid finishes on the standard Agera and the White Red graphics on the Starry and Rush.

Q2: Does the Raiz share the same protection as the rest of the Agera range?

A2: Yes. It uses the same ABS high-impact shell, ISI, DOT and ECE 22.06 certification, EQRS and micrometric buckle as every helmet in the Agera line.

Q3: Does the Agera Raiz come with an internal sun visor?

A3: Yes. A drop-down internal smoke sun visor is built in, giving instant glare protection without a separate pair of sunglasses.

Q4: Is the Agera Raiz's outer visor Pinlock-ready?

A4: Yes. It accepts a Pinlock insert, sold separately, for fog-free vision in cold or wet weather.

Q5: What sizes is the Axor Agera Raiz available in?

A5: It is available from S through 2XL. Measure your head circumference and check the size chart on this page before ordering.

Warranty and Support
Every Axor Agera helmet carries a 1 year manufacturer warranty.
Customer Care Contact: +91-7901014646 (Mon-Sat, 10am to 5pm)
Email Id: customercare@axorhelmets.com