MadDog Rage Auxiliary Light
The MadDog Rage is built for one thing above everything else: raw distance. Each pair delivers 11,600 raw lumens off a pair of 45-watt Nichia LEDs, on a beam weighted 90% spot and just 10% flood, reaching out to 380 metres on the spot component.
That's a longer throw than any other model in the MadDog range apart from the Prime. Where the Lycan and the fixed combo-beam models balance spread against reach, the Rage leans almost entirely into distance, which is exactly what riders doing sustained high-speed night riding on open highways are usually after.
Why Riders Pick the Rage
The flood component is deliberately small at 10%, giving you a 50-metre, 180-degree spread close to the bike rather than a wide flood pattern. This isn't a light built for fog or low-speed technical sections, it's built to light up what's coming at highway speed, well before your stock headlight would.
Like the Lycan, the beams switch independently, so you can drop the spot beam when you're in traffic and rely on the flood component alone, then bring the spot back for open road.
Specifications
| Spec | Detail |
|---|---|
| LED Type | Nichia LED |
| Lumens | 11,600 raw lumens per pair |
| Wattage | 45W each, 90W per pair |
| Voltage | DC 12V - 14.5V |
| Current Draw | 4.8A per pair |
| Beam Distance | 380 metres spot, 50 metres and 180-degree spread on flood |
| Optics | Hybrid, 90% spot and 10% flood, independently switchable |
| Color Temperature | 5000K - 5700K |
| IP Rating | IP67, water and dust resistant |
| Materials | Polycarbonate lens and aluminum housing |
| Lifespan | Up to 50,000 hours |
| Warranty | 18-month replacement warranty against manufacturing defects |
What's in the Box
- A pair of MadDog Rage lights
- A pair of clamps
- Screw kit and tail connectors
- Warranty card
The Rage doesn't include a wiring harness or switch by default. To make use of the independent beam switching, pair it with a compatible dual switch and wire harness sold separately.
Note for the team: confirm which specific harness/switch SKU (Wire Harness Pro vs Dual Switch Pro) is the correct fit for the Rage before this page goes live, since the Rage's wiring needs match the Lycan's independent-switching setup rather than the single-circuit harness used on Scout/Scout-X/Delta/Alpha.
Fitment and How It Compares
The bundled clamps fit standard fork diameters.
If you'd rather have a stronger flood component alongside strong spot output, the MadDog Lycan runs a more balanced 60/40 split. For even more total output with dimmer control built in, the MadDog Prime sits above the Rage as the range's flagship. Browse the complete lineup on the MadDog brand page.
Frequently Asked Questions
Q1: How far does the MadDog Rage throw light?
A1: The spot beam reaches 380 metres, which is the second-longest throw in the MadDog range after the Prime. The flood component covers 50 metres across a 180-degree spread.
Q2: Is the Rage a good choice for foggy or rainy conditions?
A2: Not really. With only 10% flood output, the Rage is built for distance rather than the wide, low flood pattern that works best in fog. For fog-heavy riding, the Lycan's stronger flood component is a better fit.
Q3: Does the Rage come with a wiring harness and switch?
A3: No, unlike the Lycan and Prime, the Rage ships with just the lights, clamps, screw kit, and tail connectors. A compatible wire harness and switch are sold separately.
Q4: What's the difference between the Rage and the Prime?
A4: The Rage runs 11,600 lumens per pair at 45W each with a 380-metre spot throw. The Prime runs 23,028 lumens per pair at 75W each with a 618-metre spot throw, and includes a dimmer, harness, and filters in the box.
Q5: What warranty does the Rage carry?
A5: It carries MadDog's standard 18-month replacement warranty against manufacturing defects.
Q6: Can the spot and flood beams on the Rage be run separately?
A6: Yes, with a compatible dual switch fitted, the spot and flood beams switch independently, so you can run either on its own or both together.