SMK Twister Blade Full Face Helmet

In stock
As low as ₹4,300.00

SMK Twister Sizing Chart

Size Cm Hat Size Inch
XS 54 - 55 6 3/4 - 6 7/8 21 1/4 - 21 5/8
S 56 - 57 7 - 7 1/8 22 - 22 1/2
M 58 - 59 7 1/4 - 7 3/8 22 7/8 - 23 1/4
L 60 - 61 7 1/2 - 7 5/8 23 5/8 - 24
XL 62 - 63 7 3/4 - 7 7/8 24 3/8 - 24 3/4
XXL 63 - 64 8 - 8 1/8 24 1/4 - 25 5/8
XXXL 65 - 66 8 1/8 - 8 1/4 25 5/8 - 26
XXXXL 67 - 68 8 3/8 - 8 1/2 26 3/8 - 26 3/4
Quick Overview

SMK Twister Blade- a latest-generation full-face helmet that defines performance, comfort and safety.


SMK Twister helmets are designed and developed in Europe by the best, expert designers, before being produced by Studds, a company based in Delhi, India that produces almost four million helmets annually, destined for markets across the world.

The external shell of SMK Twister helmet is moulded in EIRT (Energy Impact Resistant Thermoplastic), a thermoplastic resin that is particularly resistant to impact. The SMK Twister has an aerodynamic shape that ensures silence inside the helmet.

The internal shell is moulded in differentiated density EPS, for better absorption of the energy resulting from an impact.

The ventilation system of SMK Twister helmets has been designed to allow for the constant intake of fresh air through the two adjustable air vents, one positioned on the chin and another on the upper part of the shell. Hot air can exit through the rear extractor.

The visor mechanism is simple and functional, and does not require the use of tools to remove or fix the external visor. To unlock it, once lifted, just pull the red lever forward. This results in an initial click that allows the visor to remain slightly open, optimising the anti-fog effect even at low speed. The scratch resistant visor is suitable for use with Pinlock® Original.  

SMK Full Face Helmet - Twister has Extra Wide Vision that offers a much wider visual field than is standard. The practical internal sun shield is easily activated with a switch positioned on the lower left of the helmet.

The inner linings are breathable and hypoallergenic, fully removable and washable, and ensure maximum comfort even after prolonged use.

The retention system of SMK Twister Helmets is equipped with a practical quick release buckle for micrometric adjustment.

The convenient wind stop and removable nose guard complete the features of this helmet, which is also suitable for use with Bluetooth intercommunication systems.

As is the case for all Stylish SMK helmets, the SMK Twister Blade conforms to ECE 22-05 homologation. 

SMK Twister helmet features

SMK Twister helmet features

SMK Twister helmet features

SMK Twister Helmets Specification:

External shell: aerodynamic, moulded in EIRT (Energy Impact Resistant Thermoplastic)
Internal shell: moulded in differentiated density EPS
Inner : breathable, hypoallergenic liners, fully removable and washable.
Removable lower wind stop and nose guard
Ventilation : all air-vents are adjustable. Air-vents on the chin, an air-vent on the upper part of the shell, rear extractor
Visor: scratch-resistant and rapid release, suitable for use with Pinlock® Original. Extra Wide Vision (very wide visual field). Internal scratch-resistant sun shield
Visor mechanism : does not require the use of tools
Retention system : equipped with a practical quick release buckle for micrometric adjustment.
Bluetooth : compatible
Homologation : ECE 22-05

Note : All SMK helmets are sold with a clear visor. A dark / reflective visor would need to be purchased separately.

SMK Helmets buy online on