Axor Apex Racer Gloss is the sportiest-looking edition of the Apex range, with the Axor Apex Racer graphic in a glossy finish. It is meant for riders who like a race-inspired look but spend their time on the road.
The build is classic Apex: a dual EPS liner, Double D-ring lock, polycarbonate spoiler, internal sun visor and ECE R-22.06, DOT and ISI approvals. Free shipping across India, with EMI available. Buy the Axor Apex Racer Gloss Helmet online at Store4Riders.
Axor Apex Racer Gloss Helmet Features
Safety Under the paint sits a dual EPS liner built to manage impact energy, inside an ABS shell. The Double D-ring buckle gives a secure, no-slip lock, and the helmet carries ECE R-22.06, DOT and ISI approvals. |
|
Spoiler A tough polycarbonate spoiler sits at the back of the helmet to keep it stable at highway speed. It is easy to remove and replace if you want a cleaner look or need a fresh one. |
|
Ventilation The top vent is positioned to bring in as much air as possible, while the rear outlet vent works with the spoiler to move it out. A breath guard and chin curtain come with the helmet. |
|
Vision Optically correct visor, tool-free visor change and an internal sun visor: the vision setup suits riders who move between shaded roads and open highways. The AX-F180 anti-fog insert is compatible. |
Axor Apex Racer Gloss Helmet FAQs
Q1: Is the Axor Apex Racer Gloss helmet meant for track use?
A1: It is a road helmet with a race-inspired graphic. It is certified to ECE R-22.06, DOT and ISI for road riding, so use it for commutes and touring. For track days, check the organiser's helmet rules first.
Q2: Is the Axor Apex Racer Gloss Helmet ISI certified?
A2: Yes. It carries ISI certification for Indian roads, along with ECE R-22.06 and DOT FMVSS 218 homologation. The helmet is tested for energy attenuation, penetration resistance and rigidity under hot, cold, submerged and ambient conditions.
Q3: What is the difference between the Axor Apex Racer Gloss and the Axor Apex Racer Matt?
A3: Just the paint finish. Gloss is shiny and sharp, matt is flat and low-key. Safety features, spoiler, vents and visor are identical.
Q4: How do I pick the right size in the Axor Apex Racer Gloss Helmet?
A4: Measure around your head, about an inch above your eyebrows, with a soft tape and match the number to the size chart on this page. Our helmet fitting guide explains how a snug fit should feel. If you sit between two sizes, go for the one that feels firm without pressure points.
Q5: How do I clean and look after the Axor Apex Racer Gloss Helmet?
A5: Wipe the gloss shell with a soft cloth dipped in diluted mild soap, then dry with a clean cloth. Avoid solvents and harsh cleaners, which can dull the paint or damage the graphic. Our helmet maintenance guide also covers the liner and visor.