Pulsar RS200 High Performance Noise Free Chain Sprocket Kit - HPOR-281-NF
Our top-tier kit for the Pulsar RS200, combining high-performance O-ring sealing with Rolon's Noise-Free (NF) construction, built to run quieter than a standard or even our regular high-performance O-ring chain. If drivetrain noise at low RPM and light throttle bothers you on the RS200, this is the option built specifically to address it.
You still get the same sealed lubrication benefits as our standard HPOR-218 kit, longer chain life and less frequent maintenance, with the added refinement of reduced mechanical noise.
Exact tooth count and chain length are listed in the Details tab below, matched precisely to your RS200's factory specification.
Frequently Asked Questions
Q: Is the Noise-Free version actually noticeably quieter?
A: Yes, particularly at low RPM and light throttle in city riding, where chain noise is most noticeable. At sustained highway speed the difference is less pronounced since wind and engine noise dominate either way.
Q: Should I get this or your standard HPOR-218 high-performance kit?
A: Both offer the same sealed O-ring protection and chain life. Choose this Noise-Free version if reduced running noise matters to you, or the standard HPOR-218 if you'd rather save the difference in cost.
Pulsar RS200 High Performance Noise Free Chain Sprocket Kit Features:
- Suitable Motorcycle : Pulsar 200 RS
- Front Sprocket (Z) : 14T Rear Sprocket (Z) : 41T
- Number of Chain Links :110
- High performance/Solid bush/'O' ring chain
- Designed for pro biking and Racing
Pulsar RS200 High Performance Noise Free Chain Sprocket Kit Specification:
Front Sprocket
- S 02 249SR - 14 Teeth
- Mounting:- 2 Tap on PCD + Involute Spline with Bonding
Rear Sprocket
- S 02 617 - 41 Teeth
- Mounting:- 6 equispaced Holes on PCD + Bore
Chain
- R520HPOR-110-2
Front Sprocket
- Reliable with high performance & longer life.
- Smooth operation & higher transmission accuracy.
- Anti-resistant coating with Superior quality.
- Anti-wear performance which lets vehicle move with full power.
- Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
- The fitment of the product is as per OE specification.
- Heat treated and hand finished to perfection.
- Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.
- Rubber bonding for silent and smooth running thus providing noise free ride.
Rear Sprocket
- Sprockets are manufactured from carbon steel material with duly induction hardened teeth.
- Sprockets are only made using the best available materials.
- Zinc coating to provide better rust prevention.
- Induction hardening to improve wear resistance with outstanding performance.
- Shot blasted sprockets with improved surface fatigue strength.
- Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
- Sprockets are of made with best position accuracy to ensure better fitment capabilities.
- Good surface finish that makes ride smoother.
The kit contains – front sprocket, chain and rear sprocket.
Note:
- Please check the speifications carefully to identify whether it fits correctly on your specific bike model. Store4Riders will not be responsible if you purchase a kit unsuitable for your bike.
- Image is for presentation only. Actual part may vary.
Important Note: Please check the number of teeth of front and rear sprocket fitted on your bike and confirm the specs are same on product page. Also check how the sprocket fitting holes look like on both. Purchase the kit that matches the one fitted on your bike. In case of any query, please contact us before placing the order. Orders once placed can't be returned / replaced.
