Radiator Guards extend the life of the radiator by preventing damage to the radiator fins against the debris, stones and tar while riding on the roads. The Moto Fusion Radiator Guards are a state of art radiator guards which offer best protection to your motorcycle's radiator.
Made in India, these radiator guards have a weld less aluminium construction that offers best structural sturdiness and clean finish. Further, the radiator guard is coated (anodized) to increase the durability. Fitting & removing is very simple and straight forward and does not require you to cut/drill anywhere. Stock hardware can be used for fitting these guards. Stock hardware can be used for fitting these guards.
Fitted directly over the radiator, they prevent the stones and debris from hitting the radiator and damaging its fins. Sandwiched between the outer structure is the mesh, that has a net approximate air flow rate of 70%, thus providing an optimum balance between air flow and protection.
These radiator guards are Anodised for impeccable finish & durability of the coat and are available in Black and Blue colours.
Included in the package:
- Motofusion Radiator Guard (1 No)
- Zip Ties (4 Nos)
- Foam Strip (To avoid Vibration Noise)
Note: Stock Radiator Cover (Plastic) has to be removed for Installing Motofusion Radiator Guard, otherwise net air flow will be very low and engine will heat up.